Headlight Bulb Replacement - Triumph Tiger Explorer Owner's Handbook Manual

Triumph tiger explorer motorcycle owner's handbook
Hide thumbs Also See for Tiger Explorer:
Table of Contents

Advertisement

Headlight Bulb Replacement

Caution
The use of non-approved headlight bulbs
may result in damage to the headlight lens.
Use a genuine Triumph supplied headlight
bulb as specified in the Triumph Parts
Catalog.
Always have replacement headlight bulbs
installed by an authorized Triumph dealer.
It is not necessary to remove the headlight
when bulb replacement becomes necessary.
cgjn
1. Bulb retainer (right hand shown)
2. Bulb retainer hook
3. Bulb
Warning
The bulbs become hot during use. Always
allow sufficient time for the bulb to cool
before handling. Avoid touching the glass
part of the bulb. If the glass is touched or
gets dirty, clean with alcohol before reuse.
Maintenance and Adjustment
To replace a bulb:
Remove the rider's seat.
Disconnect the battery, negative (black) lead
first.
Remove the bulb cover from the bulb to be
replaced by rotating it counter-clockwise.
Disconnect the multi-plug from the bulb.
Detach the bulb retainer from the hook on
the headlight assembly and rotate it away
from the bulb as shown.
Remove the bulb from the bulb retainer.
Installation is the reverse of the removal
procedure.
Position Lamp Bulb Replacement
3
1
2
2
chgn
1. Fasteners
2. Headlight surround
3. Position lamp bulb
The position lamp is fitted to the center of the
headlight. To replace the bulb, remove the
four fasteners and remove the headlight
surround, detach the rubber retainer from
the headlight and pull out the bulb.
Installation is the reverse of the removal
procedure.
1
1
3
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents