Triumph Traction Control - If Equipped - Triumph Tiger Explorer Owner's Handbook Manual

Triumph tiger explorer motorcycle owner's handbook
Hide thumbs Also See for Tiger Explorer:
Table of Contents

Advertisement

General Information
When the correct hour display is shown,
press the set button. The minutes display will
begin to flash and the word Min is visible in
the display screen. The minutes display is
adjusted in the same way as for the hours.
Once both hours and minutes are correctly
set, press the set button to confirm and t-SEt
will be visible in the display screen. Press the
home button and the odometer in the trip 1
menu will be visible in the display screen.
2
3
5
1
cgjp_2_1
1. Clock display
2. Hours read-out
3. Minutes read-out
4. Display screen (Hour selected for
adjustment)
5. Home button
32
Triumph Traction Control - If
Equipped
Triumph traction control is not a substitute
for riding appropriately for the prevailing
road and weather conditions. The traction
control cannot prevent loss of traction due
to:
excessive speed when entering
turns;
accelerating at a sharp lean angle;
braking.
Traction control can not prevent the front
wheel from slipping.
Failure to observe any of the above may
result in loss of motorcycle control and an
accident.
If equipped, this Triumph model has traction
4
control to help maintain traction when
accelerating on wet/slippery road surfaces. If
sensors detect that the rear wheel is losing
traction (slipping), the traction control system
will engage and alter the engine power until
traction to the rear wheel has been restored.
The traction control warning light will flash
while it is engaged and the rider may notice a
change to the sound of the engine.
Note:
Traction control will not function if
there is a malfunction with the
ABS system. The warning lights for
the ABS, traction control and the
MIL will be illuminated.
Warning

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents