Avoid Static Electricity - American Megatrends Olympus Pentium II PCI ISA Manual

Step 2 Set Jumpers,
EP1, EP2 Flash ROM Type EP1 and EP2 are 3-pin bergs that specify the type of flash ROM
installed on the Olympus motherboard. The settings are:
Flash ROM Type
MXIC MX28F2000P
SST 29EE010
ATMEL AT29C010
AMD AM29F002T

Avoid Static Electricity

Static electricity can damage the motherboard and other computer components.
Keep the motherboard in the anti-static bag until it is to be installed. Wear an
anti-static wrist grounding strap before handling the motherboard. Make sure
you stand on an anti-static mat when handling the motherboard.
Avoid contact with any component or connector on any adapter card, printed
circuit board, or memory module. Handle these components by the mounting
bracket.
Continued
EP1
2 MB ROM
Short Pins 1-2
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
EP2
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
Chapter 1 Hardware Installation 15