American Megatrends Olympus Pentium II PCI ISA Manual page 71

Peripheral Setup,
Continued
Parallel Port IRQ This option specifies the IRQ used by the parallel port. The settings are
Disabled, Auto, or (IRQ) 7. The Optimal default setting is Auto when the
OnBoard Parallel Port option is Auto.
Parallel Port DMA Channel This option is available only if the setting for the Parallel Port
Mode option is ECP. This option sets the DMA channel used by the parallel
port. The settings are Auto, (DMA Channel) 1, or 3. The Optimal default setting
is Auto when the OnBoard Parallel Port option is Auto.
Onboard IDE This option specifies the IDE channels used by the onboard IDE controller. The
settings are Disabled, Primary, Secondary, or Both. The Optimal and Fail-Safe
default settings are Both.
Chapter 2 AMIBIOS Setup 65