American Megatrends Olympus Pentium II PCI ISA Manual page 64

Power Management Setup,
Device 6 (Serial Port 1)
Device 7 (Serial Port 2)
Device 8 (Parallel Port)
Device 5 (Floppy Disk)
Device 0 (Primary Master IDE)
Device 1 (Primary Salve IDE)
Device 2 (Secondary Master IDE)
Device 3 (Secondary Slave IDE) When set to Monitor, these options enable event monitoring on
the specified hardware interrupt request line. If set to Monitor and the computer
is in a power saving state, AMIBIOS watches for activity on the specified IRQ
line. The computer enters the Full On state if any activity occurs. AMIBIOS
reloads the Standby and Suspend timeout timers if activity occurs on the
specified IRQ line.
The settings for each of these options are Monitor or Ignore. The Optimal
default setting is Ignore, except for Device 0 (Primary Master IDE), which has
an Optimal default setting of Monitor. The Fail-Safe default setting is Monitor.
58 Olympus PCI Pentium II/Pentium III ISA Motherboard User's Guide
Continued