American Megatrends Olympus Pentium II PCI ISA Manual page 54

Advanced Setup,
Continued
Display Mode at Add-On ROM Init This option specifies the system display mode that is set at
the time that AMIBIOS POST initializes an optional ROM. The settings are:
Setting
Force BIOS
Keep Current
The Optimal and Fail-Safe default settings are Force BIOS.
Floppy Access Control This option specifies the read/write access that is set when booting from a
floppy drive. The settings are Read-Write or Read-Only. The Optimal and Fail-
Safe default settings are Read-Write.
Hard Disk Access Control This option specifies the read/write access that is set when booting
from a hard disk drive. The settings are Read-Write or Read-Only. The Optimal
and Fail-Safe default settings are Read-Write.
S.M.A.R.T. for Hard Disks Set this option to Enabled to permit AMIBIOS to use the SMART
(Self Monitoring Analysis and Reporting Technology) protocol for reporting
server system information over a network. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are Disabled.
Boot Up Num Lock Set this option to On to turn the Num Lock key On at system boot. The
settings are On or Off. The Optimal and Fail-Safe default settings are On.
PS/2Mouse Support Set this option to Enabled to enable AMIBIOS support for a PS/2-type
mouse. The settings are Enabled or Disabled. The Optimal and Fail-Safe default
settings are Enabled.
48 Olympus PCI Pentium II/Pentium III ISA Motherboard User's Guide
Description
The display mode currently being used by AMIBIOS is
used.
The current display mode is used.
Cont'd