Preparing Installation Files; Preparing Needed Tools; Choosing The Installation Site - Avaya C360 Quick Start For Hardware Installation

Before you Start
System administration
●
Site security
●
Site deliveries
●

Preparing Installation Files

Ensure that you load the latest versions of the firmware file for the C360. You can download the
firmware file needed for your installation from the Avaya Support Web site, at
support.avaya.com.

Preparing Needed Tools

Prepare the tools you need to mount the C360, according to the
Table 1: Mounting Tools
If you need to mount on...
Rack or wall
Flat wall
Uneven wall

Choosing the Installation Site

Ensure that the location where you install your C360 fulfills the following requirements:
Cables are away from sources of electrical noise such as:
●
radio transmitters
●
broadcast amplifiers
●
6 Quick Start for Hardware Installation: The Avaya C360 Converged Stackable Switch
Prepare these tools
Phillips head screwdriver
screws to fasten C360 to the wall
16.3" x 18.3" (415 x 465 mm) plywood board
●
0.8" (20 mm) thick
wood screws
screws to fasten the C360 to the wall
●
http://
Table 1: