Water Pump And Oil Cooler - Kubota V3600-E3 Shop Manual

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM

(8) Water Pump and Oil Cooler

Fan Drive Pulley
1. Set the stopper to the flywheel.
2. Remove the crankshaft screw (2).
3. Draw out the fan drive pulley (1).
(When reassembling)
Tightening torque Crankshaft screw
(1) Fan Drive Pulley
Water Pump
1. Disconnect the water hose. (V3600-E3B, V3600-T-E3B,
V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, V3800DI-T-
E3BG)
2. Remove the water pump (1).
(When reassembling)
• When mounting the water pump, take care not to forget mounting
the O-ring. (V3600-E3B, V3600-T-E3B, V3800DI-T-E3B,
V3300-E3BG, V3600-T-E3BG, V3800DI-T-E3BG)
(1) Water Pump
(2) Gasket
Oil Cooler
1. Remove the oil filter cartridge (1).
2. Remove the oil cooler joint screw (3).
3. Disconnect the water hoses (2).
4. Remove the oil cooler (4).
Tightening torque Oil cooler joint screw
(1) Oil Filter Cartridge
(2) Water Hose
S-71
DIESEL ENGINE
255 to 274 N·m
26.0 to 28.0 kgf·m
188 to 202 lbf·ft
(2) Crankshaft Screw
W1185033
[A] V3600-E3B, V3600-T-E3B,
V3800DI-T-E3B, V3300-E3BG,
V3600-T-E3BG, V3800DI-T-E3BG
[B] V3600-E3CB, V3600-T-E3CB,
V3800DI-T-E3CB
W1187742
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(3) Oil Cooler Joint Screw
(4) Oil Cooler
W1032266