Turbocharger(V3600-T-E3B, V3800Di-T-E3B, V3600-T- E3Cb, V3800Di-T-E3Cb, V3600-T-E3Bg, V3800Di-T-E3Bg - Kubota V3600-E3 Shop Manual

V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
(3) TURBOCHARGER
(V3600-T-E3B, V3800DI-T-E3B, V3600-T-E3CB, V3800DI-T-E3CB, V3600-T-E3BG,
V3800DI-T-E3BG)
CAUTION
• While the engine is running and or just after it stops, the turbocharger is hot, be careful not to touch the
turbocharger.
NOTE
• When detaching and attaching the turbocharger assembly, be very careful not to allow dust, dirt and other
foreign matter in the oil pipes.
• When the turbocharger assembly has been replace, pour fresh engine oil through the oil filler port of the
turbocharger.
• Before starting the engine, make sure that air cleaner is in position.
Oil Pipe
1. Remove the cover (8) (V3800DI-T-E3B, V3800DI-T-E3CB,
V3800DI-T-E3BG only).
2. Remove the joint bolt (5) and clamp (4) and take off the pipe 1 (2).
3. Remove the bolts (1) and release the clamp (6).
4. Disconnect the oil pipe 2 (7) and pipe 4 (3).
(When reassembling)
• Pour fresh engine oil through the oil filler port of the turbocharger.
• Replace the gasket with new one.
• Be careful not to allow dust, dirt and other foreign matters in the
oil pipes.
NOTE
• Tape or plug all openings to prevent foreign matters from
damaging the oil cavities in the turbocharger.
(1) Bolt
(2) Oil Pipe 1
(3) Oil Pipe 4
(4) Clamp
(5) Joint Bolt
Turbocharger
1. Remove the turbocharger flange (1).
2. Remove the inlet hose (2).
3. Remove the turbocharger assembly (3).
(When reassembling)
• Replace the gasket with new one.
(1) Turbocharger Flange
(2) Inlet Hose
S-48
DIESEL ENGINE
(6) Clamp
(7) Oil Pipe 2
(8) Cover
[A] V3600-T-E3B, V3600-T-E3CB,
V3600-T-E3BG
[B] V3800DI-T-E3B, V3800DI-T-E3CB,
V3800DI-T-E3BG
W1025983
(3) Turbocharger Assembly
W1078106