Store Name Message Programming - TEC MA-600 Series Programming Manual

6. TERMINAL FILE PROGRAMMING
6.8

Store Name Message Programming

A maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt is
programmed here.
Prior to the Store Name Message Programming, be sure to select SET status for Address No. 31, Bit No. 5
of the system option.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
Depress [1] or [Enter].
Depress [↓] twice then [Enter].
*
Input a message in the 1st line.
Input a message in the 2nd line.
Input a message in the 3rd line.
Input a message in the 4th line.
Main Menu
or
Depress [3].
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[End]
"1 MESSAGES" for various message programming is selected.
"3 STORE MESSAGE" is selected.
The message already programmed is displayed.
The ECR enters the 1st line message input mode
A maximum of 32 one-byte or 16 two-byte characters are input.
The 1st line message is entered and the programmed data is printed.
The ECR enters the 2nd line message input mode
A maximum of 32 one-byte or 16 two-byte characters are input.
The 2nd line message is entered and the programmed data is printed.
The ECR enters the 3rd line message input mode
A maximum of 32 one-byte or 16 two-byte characters are input.
The 3rd line message is entered and the programmed data is printed.
The ECR enters the 4th line message input mode
A maximum of 32 one-byte or 16 two-byte characters are input.
The 4th line message is entered and the programmed data is printed.
This programming is ended. A long receipt is issued and the display
returns to Main Menu screen.
*: To program a message in a desired line, move the cursor there with
↓
the [ ] key then depress the [Enter] key.
6-55
6.8 Store Name Message Programming
EO3-11106