Maintenance - Vivotek PZ8111 User Manual

VIVOTEK

Maintenance

This chapter explains how to restore the Network Camera to factory default, upgrade firmware
version, etc�
Reboot
This feature allows you to reboot the Network Camera, which takes about one minute to complete� When
completed, the live video page will be displayed in your browser� The following message will be displayed
during the rebooting process�
If the connection fails after rebooting, manually enter the IP address of the Network Camera in the
address field to resume the connection.
Restore
This feature allows you to restore the Network Camera to factory default settings�
Network Type: Select this option to retain the Network Type settings� (Please refer to Network Type on
page 33�)
Daylight Saving Time: Select this option to retain the Daylight Saving Time settings� (Please refer to
System on page 24�)
Custom Language: Select this option to retain the Custom Language settings�
If none of the options is selected, all settings will be restored to factory default�
The following message is displayed during the restoring process�
Calibrate
This feature re-calibrate the home position to the default center to recover the any displacement caused
by external forces. Please note that there is no confirm message box after clicking on Calibrate, and the
Network Camera will calibrate immediately�
92 - User's Manual