Vivotek PZ8111 User Manual page 49

3� Attach a LAN cable between your wireless camera and router� Use the IW2 utility in the product CD to
locate the camera in LAN� Double-click on the IP address to start an IE session with the camera�
4� Enter the Configuration > Wireless menu, and enter the name (SSID) of the existing wireless
network, channel number, and other related information� See the following pages for more details� You
may enter the Configuration > Network page to setup DHCP or static IP if necessary�
5� Disconnect DC power and LAN cable from camera, and re-connect the DC power to boot the camera�
Your IW2 utility should then be able to locate your wireless camera�
For detailed configuration options, please refer to the following pages.
Every time the camera is restarted by reconnecting power, network connection is ready when the camera
starts the initial pan/tilt calibration�
VIVOTEK
User's Manual - 49