Vivotek PZ8111 User Manual page 62

VIVOTEK
BLC area selection: Click this button to open an area selection window� As the window shown below, the
video will be divided into 48 rectangle areas equally� Check some of the areas to enable BLC� Note that if
no area is selected, the Enable BLC option would be of no use�
The picture below illustrates the corresponding areas of the selection window� You can click Select All to
check all the areas in the window, or click Clear All to do vice versa� When completed with the settings
on this page, click Save to take effect and click Close to exit the page�
Back to the Sensor Settings page, you can click Preview to fine-tune the image, or click Restore to
recall the original settings without incorporating the changes� When completed with the settings on this
page, click Save to take effect and click Close to exit the page� Click Profile to configure a different
setting for a different scenario, e�g�, the low light night mode�
Advanced Mode
Video quality settings for multiple streams
The Network Camera offers three choices of video compression standards for real-time viewing: MPEG-
4, H�264, and MJPEG�
Click the items to display the detailed configuration settings. You can set up two seperate streams for the
Network Camera for different viewing devices� For example, set a smaller frame size and lower bit rate
for remote viewing on mobile phones and a larger video size and a higher bit rate for live viewing on web
browsers�
If MPEG-4 mode is selected, it is streamed in RTSP protocol�
62 - User's Manual