Using 3Gpp-Compatible Mobile Devices - Vivotek PZ8111 User Manual

Using 3GPP-compatible Mobile Devices

To view the streaming media through 3GPP-compatible mobile devices, make sure the Network
Camera can be accessed over the Internet� For more information on how to set up the Network
Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8�
To utilize this feature, please check the following settings on your Network Camera:
1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
sure the authentication mode of RTSP streaming is set to disabled�
For more information, please refer to RTSP Streaming on page 46�
2� As the the bandwidth on 3G networks is limited, larger video sizes are not available� Please
set the video and audio streaming parameters as listed below�
For more information, please refer to Audio and Video on page 58�
Video Mode
Frame size
Maximum frame rate
Intra frame period
Video quality (Constant bit rate)
Audio type (GSM-AMR)
3� As most ISPs and players only allow RTSP streaming through port number 554, please set
the RTSP port to 554� For more information, please refer to RTSP Streaming on page 46�
4� Launch the players on 3GPP-compatible mobile devices (ex� Real Player)�
5� Type the following URL commands in the player�
The address format is
access name for stream1, 2, 3, or
For example:
rtsp://192.168.5.106:554/live.sdp
MPEG-4
176 x 144
5 fps
1S
40kbps
12�2kbps
rtsp://<public ip address of your camera>:<rtsp port>/<RTSP streaming
4>�
VIVOTEK
User's Manual - 15