Vivotek PZ8111 User Manual page 60

VIVOTEK
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5. The default value is set to 0.
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5. The default value is set to 0�
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. The default value is set to 0�
■ Sharpness: Adjust the image sharpness level, which ranges from -3 to +3. The default value is set to +3.
■ Auto tracking white balance: This option is usually selected when the Network Camera is placed in
outdoor environments� Adjusting the 0~8 level would help the Network Camera capture video with
correct colors� The default value is set to 4�
White balance control: Select this option will disable Auto tracking white balance� This option is usually
selected when the Network Camera is placed in indoor environments� The administrator can adjust the
value for best color temperature: 3200k, 4000k, 4800k, 5600k, 6400k, 7200k, 8000k�
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
setting and click Close to exit the page�
Privacy mask
Advanced Mode
Click Privacy Mask to open the settings page� On this page, you can block out certain sensitive zones to
address privacy concerns�
■ To set the privacy mask windows, follow the steps below:
1� Click New to add a new window�
2� Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size
of the object (height and width) you want to cover�
3� Enter a Window Name and click Save to enable the setting�
4� Check Enable privacy mask to enable this function�
NOTE:
► Up to 5 privacy mask windows can be configured on the same screen.
► If you want to delete a configured mask window, click on the 'X' button at the upper right corner of the
window�
60 - User's Manual