Vivotek PZ8111 User Manual page 89

Source: Select the recording source (stream 1 to stream 4)�
Recording Schedule: Specify the recording duration�
Trigger: Select the trigger of recording action either as a planned schedule or network failure�
Recording Schedule:
■ Select the days of the week.
■ Select the recording to be Always recording or starting and ending between two points in time in a 24-
hr format�
Destination: You can select the network storage to store the recorded video files.
Capacity: You can choose either the "entire free space" or "reserved space"� The reserved space must
be larger than 15MB, and that space is important if you select the cyclic recording option� The reserved
space will be a turn-around buffer during the transaction stage when a networked storage is about to be
filled up and old data will be overwritten.
File name prefix: Enter the text that will be appended to the front of the file name.
Enable cyclic recording: If you check this item, when the maximum capacity is reached, the oldest file
will be overwritten by the latest one� The reserved amount is reserved for cyclic recording to prevent
malfunction� This value must be larger than 15 MBytes�
If you want to enable recording notification, please click
Recording notify on page 76 for detailed information�
When completed, select Enable this recording� Click Save to enable the setting and click Close to exit
this page. When the system begins recording, it will send the recorded files to the Network Storage.
The new recording name will appear in the drop-down list on the recording page as shown below�
To remove a recording setting from the list, select a recording name from the drop-down list and click
Delete�
■ Click Video (Name): Opens the Recording Settings page to modify�
■ Click ON (Status): The Status will become
NAS (Destination): Opens the file list of recordings as shown below. For more information about
■ Click
folder naming rule, please refer to page 86 for details�
Application
OFF and stop recording�
20081120
20081121
20081122
to set up� Please refer to Trigger >
User's Manual - 89
VIVOTEK