Wired Remote Controller Installation
Wired Remote Controller Error Codes
Display
Communication error between wired remote controller and indoor/ERV units after successful
communication.
No communication between Master(Main) and Slave(Sub) wired remote controllers.
No communication between wired remote controller and indoor/ERV units
Wired remote controller is connected on F1/F2 channel.
Two or more wired remote controllers is set as Master(Main).
No ERV unit installed for interlocking function.
No indoor unit installed for interlocking function.
Over 16 indoor/ERV indoor units installed.
Indoor units of different temperature setting(°C/°F) connected to same wired remote controller.
Wired remote controller(s) has different temperature unit setting with indoor unit(s).
Slave(Sub) wired remote controller has different option setting with Maser(MAIN).
16
Description