Group Control With Your Wired Remote Controller - Samsung MWR-WE10 Installation Manual

Group Control with Your Wired Remote Controller

G roup control means that you are using one Wired Remote Controller to control two or more indoor units and

ventilator(ERV) at the same time.
When Connected to an Indoor Unit Only
(1) U sing One Wired Remote Controller to control three indoor Units
Outdoor Unit
COM1(F1, F2)
Indoor Unit
Wired Remote
Controller
(2) U sing One Wired Remote Controller to control indoor units connected to different outdoor unit
Outdoor Unit
COM1(F1, F2)
Indoor Unit
Outdoor Unit
COM1(F1, F2)
Indoor Unit
• R egardless of the indoor unit's group address (RMC address), only the indoor units connected to COM2 are
controlled in group.
• The power cable (V1, V2) is not connected between indoor units.
• The power cable for your Wired Remote Controller (V1, V2) should be connected to only one indoor unit.
• Regardless of your outdoor units, you can control a maximum of 16 indoor units as a group.
COM1(F1, F2)
Indoor Unit
COM2(F3, F4)
COM2(F3, F4)
Wired Remote
Controller
COM2(F3, F4)
COM1(F1, F2)
Indoor Unit
COM2(F3, F4)
9