Speaker Distance; The Input Assign Menu; Analog Input - Pioneer VSX-S510-k Operating Instructions Manual

7 7
5
Adjust the level of each channel using /.
/
If you selected Manual, use to switch speakers. The
Auto setup will output test tones in the order shown on-
screen:
2c . Ch an nel Leve l
Fron t L 0d B
[ 0d B ]
Cent e r
[ 0dB ]
Fron t R
Su rro un d R [ 0dB ]
[ – – – ]
Su rr. Back R
[ – – – ]
Su rr. Back L
Su rro un d L [ 0 dB ]
[ 0 dB ]
Su bwoo fer
Ret u rn
Adjust the level of each speaker as the test tone is
emitted.
Note
• If you are using a Sound Pressure Level (SPL) meter, take
the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow
reading).
• The subwoofer test tone is output at low volumes. You may
need to adjust the level after testing with an actual
soundtrack.
6
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
Tip
• You can change the channel levels at any time by press
, then press and
CH SEL CH LEVEL +/–
RECEIVER
remote control. You can also press
CH SEL
select the channel, and then use /
channel levels.

Speaker Distance

For good sound depth and separation from your system, you
need to specify the distance of your speakers from the
listening position. The receiver can then add the proper delay
needed for effective surround sound.
1
Select 'Manual SP Setup' from the Home Menu.
2
Select 'Speaker Distance' from the Manual SP Setup
menu.
2 . Manual S P S e tu p
a . S peaker S e tti ng
b . X . Ove r
c . Cha nnel L ev e l
d . S pea ker D is t an c e
3
Adjust the distance of each speaker using /.
You can adjust the distance of each speaker in 0.1 m
increments.
4
When you're finished, press RETURN.
You return to the Manual SP Setup menu.
on the
and use / to
to adjust the
2 d . S pe a k e r D is ta n ce
3 m
F ro nt L
C e nte r [ 3 m ]
[ 3 m ]
F ro nt R
S urroun d R [ 3 m ]
S urr. Ba ck R [ – – – – ]
[ – – – – ]
S urr. Ba ck L
S urroun d L [ 3 m ]
S ubwo ofe r [ 3 m ]
R et urn Re turn
53

The Input Assign menu

Assigns input function for analog audio input terminal.
• For the assignment of the digital signal inputs, see
Selecting the audio input signal on page

Analog Input

ANALOG IN1 audio input terminal is assigned to CD under
factory settings, but this can be changed to TV input.
1
Select 'Input Assign' from the Home Menu.
2
Select 'Analog Input' from the Input Assign menu.
3 . In pu t A s s ig n 3 a . A na lo g I np u t
a . A na lo g In pu t
An a log
R etu rn
VSX-S510
3
Select the desired input option for the ANALOG IN1
audio input terminal.
4
When you're finished, press RETURN.
You return to the Input Assign menu.
Note
• When playing analog input audio, switch to the CD or TV
input menu, press and press
RECEIVER
several times to choose A (Analog). (see
input signal on page 26)
Home Menu
4
7
26.
58
C D
Re t ur n
SIGNAL SEL
Selecting the audio