Listening To Your System; Choosing The Listening Mode; Auto Playback; Listening In Surround Sound - Pioneer VSX-S510-k Operating Instructions Manual

Chapter
5
5

Listening to your system

Choosing the listening mode

This receiver offers a variety of listening modes to
accommodate playback of various audio formats. Choose one
according to your speaker environment or the source.

While listening to a source, press the listening mode
button repeatedly to select a listening mode you want.
• The listening mode is shown on the display on the front
panel.
Important
• The listening modes and many features described in this
section may not be available depending on the current
source, settings and status of the receiver.

Auto playback

AUTO/ AUTO SURROUND/
DIRECT
STREAM DIRECT
The simplest, most direct listening option is the AUTO
SURROUND feature. With this, the receiver automatically
detects what kind of source you're playing and selects
multichannel or stereo playback as necessary.
• Press repeatedly until AUTO SURROUND
AUTO/DIRECT
shows briefly in the display (it will then show the decoding
or playback format). Check the digital format indicators in
the display to see how the source is being processed.
Note
• Stereo surround (matrix) formats are decoded accordingly
using NEO:6 CINEMA or DOLBY PLIIx MUSIC (VSX-S510
only) (see Listening in surround sound below
these decoding formats).
• When listening to the ADAPTER input, the S.R AIR feature
is selected automatically (see Using the Advanced surround
on page 37 for more on this).

Listening in surround sound

ALC/
STANDARD
Using this receiver, you can listen to any source in surround
sound. However, the options available will depend on your
speaker setup and the type of source you're listening to.
• If the source is Dolby Digital, DTS, or Dolby Surround
encoded, the proper decoding format will automatically be
selected and shows in the display.
When you select STEREO ALC (Auto Level Control stereo
mode), this unit equalizes playback sound levels if each sound
level varies with the music source recorded in a portable
audio player.
When you select STEREO, you will hear the source through
just the front left and right speakers (and possibly your
subwoofer depending on your speaker settings). Dolby Digital
and DTS multichannel sources are downmixed to stereo.
The following modes provide basic surround sound for stereo
and multichannel sources.
Explanatory notes
No: No connected / Yes: Connected / Two: Two speakers are
connected / –: Whether connected or no
36
Type of surround modes Suitable sources
Two channel sources
for more on
STEREO ALC
DOLBY PLIIx MOVIE
DOLBY PLII MOVIE
DOLBY PLIIx MUSIC
DOLBY PLII MUSIC
ALC/STANDARD SURR
DOLBY PLIIx GAME
DOLBY PLII GAME
NEO:6 CINEMA
c
NEO:6 MUSIC
DOLBY PRO LOGIC
d
STEREO
Multichannel sources
STEREO ALC
DOLBY PLIIx MOVIE
DOLBY PLIIx MUSIC
DOLBY DIGITAL EX
e
DTS-ES
e
DTS NEO:6
d
STEREO
If surround back channel processing
a.
or the surround back speakers are set to NO, DOLBY PLIIx
becomes DOLBY PLII (5.1 channel sound).
You can also adjust the C.WIDTH, DIMEN., and PNRM. effect
b.
(see Setting the Audio options on page
You can also adjust the C.IMG effect (see
c.
options on page
The audio is heard with your surround settings and you can still
d.
use the Midnight, Loudness, Phase Control, Sound Retriever
and Tone functions.
VSX-S510 only
e.
Note
• In modes that give 6.1 channel sound, the same signal is
heard from both surround back speakers (VSX-S510 only).
See above.
Movie
a, e
Music
a, b, e
b
Video games
a, e
Movie
c
Music
Old movies
See above.
See above.
Movie
e
Music
b, e
Movie/Music
e
Movie/Music
Movie/Music
See above.
(page 38) is switched off,
40).
Setting the Audio
40).
4
7
58