Playing Back Files Stored On An Ipod; Basic Playback Controls; Switches Between The Ipod Controls And The Receiver Controls; Playing A Usb Device - Pioneer VSX-S510-k Operating Instructions Manual

4 4
3
Press iPod/USB to switch the receiver to the iPod/USB
input.
When the display shows the names of folders and files,
you're ready to play music from the iPod.
• If after pressing the display shows NO
iPod/USB
DEVICE, try switching off the receiver and
reconnecting the iPod to the receiver.
• The controls of your iPod will be inoperable when
connected to this receiver.

Playing back files stored on an iPod

To navigate songs on your iPod, you can take advantage of the
OSD of your TV connected to this receiver.
• Note that non-roman characters in the title are displayed as
'#'.
• This feature is not available for photos or video clips on your
iPod.
Finding what you want to play
When your iPod is connected to this receiver, you can browse
songs stored on your iPod by playlist, artist, album name,
song name, genre or composer, similar to using your iPod
directly.
1
/
Use to select a category, then press
browse that category.
• When  or  is pressed at the list screen, the
page switches (VSX-S510 only).
• To return to the previous level any time, press RETURN.
2
/
Use to browse the selected category (e.g.,
albums).
• Use / to move to previous/next levels.
3
Continue browsing until you arrive at what you want to
play, then press  to start playback.
Tip
• If you're in the song category, you can also press
start playback.
• You can play all of the songs in a particular category by
selecting the All item at the top of each category list. For
example, you can play all the songs by a particular artist.

Basic playback controls

This receiver's remote control buttons can be used for basic
playback of files stored on an iPod.
• Press to switch the remote control to the iPod/
iPod/USB
USB operation mode.
• During Audiobook playback, press
playback speed: Faster  Normal  Slower
ENTER to
Switches between the iPod controls and the
receiver controls
This allows you to switch between performing iPod operations
via the receiver remote control or on the iPod itself.

Press iPod CTRL
• Press again to switch back to the receiver
iPod CTRL
controls when you're done.
Tip
• Change the receiver's input to the iPod in one action by
pressing
iPod iPhone or iPad (VSX-S510 only) DIRECT
on the front panel to enable iPod operations on
CONTROL
the iPod.
to
ENTER

Playing a USB device

It is possible to connect a USB memory device to the receiver,
and then playback music files and slide shows (only for VSX-
S510) stored on the USB memory using the receiver.
/ to switch the
to switch to the iPod controls.
29
Important
• Pioneer cannot guarantee compatibility (operation and/or
bus power) with all USB mass storage devices and
assumes no responsibility for any loss of data that may
occur when connected to this receiver.
• About one minute is required between turning the power
on and completion of startup.
Note
• Compatible USB devices include external magnetic hard
drives, portable flash memory (particularly keydrives) and
digital audio players (MP3 players) of format FAT16/32.
• Copyrighted audio files cannot be played back on this
receiver.
• With large amounts of data, it may take longer for the
receiver to read the contents of a USB device.
• If the file selected cannot be played back, this receiver
automatically skips to the next file playable.
• When the file currently being played back has no title
assigned to it, the file name is displayed in the OSD instead;
when neither the album name nor the artist name is
present, the row is displayed as a blank space.
• Note that non-roman characters in the playlist are
displayed as '#' (VSX-S310 only).
• Make sure the receiver is in standby when disconnecting
the USB device.
1
Switch on the receiver and your TV.
See Connecting a USB device on page
2
Switch the TV input so that it connects to the receiver.
• Switch the TV input to the input that connects this
receiver to the TV through the corresponding HDMI
cable.
3
Press iPod/USB on the remote control to switch the
receiver to the iPod/USB input.
When the display shows the names of folders and files,
you're ready to play from the USB device.
If a USB Error message lights in the display, try following
the points below:
• Switch the receiver off, then on again.
• Reconnect the USB device with the receiver switched
off.
Basic playback
4
7
58
21.