Pioneer VSX-S510-k Operating Instructions Manual page 27

4 4
• When set to H (HDMI) or C1/O1 (digital), 2 lights when a
Dolby Digital signal is input, and DTS lights when a DTS
signal is input.
• When digital input (optical or coaxial) is selected, this
receiver can only play back Dolby Digital, PCM (32 kHz to
192 kHz) and DTS (including DTS 96 kHz/24 bit) digital
signal formats. The compatible signals via the HDMI
terminals are: Dolby Digital, DTS, SACD (DSD 2 ch only),
PCM (32 kHz to 192 kHz sampling frequencies), Dolby
TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master
Audio (VSX-S510 only) and DVD Audio (including 192 kHz).
With other digital signal formats, set to A (analog).
• You may get digital noise when a LD or CD player
compatible with DTS is playing an analog signal. To prevent
noise, make the proper digital connections
set the signal input to C1/O1 (digital).
• Some DVD players don't output DTS signals. For more
details, refer to the instruction manual supplied with your
DVD player.
Tip
• In order to enjoy the picture and/or sound from devices connected to each terminal, select the input by doing the following.
VSX-S510
(page 16) and
TUNER
Video/Audio (HDMI)
DVD BD SAT/CBL GAME DVR/BDR
ADAPTER
Audio
CD TV
RECEIVER
A
ANALOG IN1 audio input terminal is
assigned to CD under factory settings. If
you want to change this to TV input,
please change the settings in the Input
Assign menu (page 53).
27
Basic playback
Audio
TV
(TV input)
NETWORK
RECEIVER
O1
Audio
TV CD
RECEIVER
C1
4
7
58