2
2
VSX-S310 connection diagram
Powered
Front right
Subwoofer
LINE LEVEL
LINE LEVEL
INPUT
INPUT
PREOUT
SUBWOOFER
Center
SURROUND
CENTER
R
L
FRONT
R
L
Surround right
Surround left
Switching the speaker terminal
VSX-S510: When the
The Speaker System setting (VSX-S510 only) on page 54
Front left
press of the SP-A/B button will switch the SPAB used for playback: SP, SPA, SPB,
SPAB.
VSX-S310: Each press of the speaker button will switch the speaker used for playback: SP,
SPA.
When the speaker system is set to SP-B: Each press of the speaker button will switch the
speaker used for playback: OFF, A, B, AB.
When the speaker system is set to anything other than SP-B: Each press of the speaker button
will switch the speaker used for playback: OFF, A. For more details on the speaker system
please refer to
The Speaker System setting (VSX-S510 only) on page
Press repeatedly to choose a speaker terminal option:
•
SPA – Sound is output from the speakers connected to the A-speaker terminals
(multichannel playback is possible).
•
SPB (VSX-S510 only) – Sound is output from the two speakers connected to the B-speaker
terminals (only stereo playback is possible).
•
SPAB (VSX-S510 only) – Sound is output from the A-speaker terminals, the two speakers
in the B-speaker terminals, and the subwoofer. Multichannel sources are downmixed only
when the STEREO or STEREO ALC mode is selected for stereo output from A-speaker
terminals.
•
SP – No sound is output from the speakers.
Note
•
VSX-S510 only: The subwoofer output depends on the settings you made in
page
51. However, if SPB is selected above, no sound is heard from the subwoofer (the LFE
channel is not downmixed).
•
All speaker terminals are switched off (SP) when headphones are connected. SPB can be
selected even when headphones are connected for VSX-S510.
14
Connecting your equipment
is set to SPB, each
54.
Speaker Setting on
4
7
58