Ricoh Aficio2090 General Settings Manual page 79

Note
❒ Default: Display mode
❒ When the optional booklet finisher, or Finisher 3000B (100-Sheet Staples) is
installed, you can specify an output tray to which documents are deliv-
ered. For more information about how to specify an output tray for each
function, see the following descriptions:
• p.66 "Output: Copier"
• p.67 "Output: Document Server"
• p.67 "Output: Printer"
❖ ❖ ❖ ❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function (see p.32 "Multi-Access"). This is useful
if you make many copies and you have to change the settings for each copy.
If you set a large value, you can prevent jobs from other functions interrupt-
ing the copy job.
Note
❒ Default: 3 seconds
❒ The Function Reset Timer setting is ignored if "Interleave" is set for "Print
Priority" (see p.64 "Print Priority").
❒ When you select "Set Time", enter the time (3–30 seconds in 1 second in-
crements) using the number keys.
❖ ❖ ❖ ❖ Interleave Print
You can set the timing for functions to switch when [Print Priority] has been set
to [Interleave].
Note
❒ Default: 10 sheets
❒ Depending on printing time, set values may change.
❒ The timing for functions can be set from 1 to 20 sheets.
❖ ❖ ❖ ❖ Status Indicator
You can specify whether the statue indicator shows the machine status or not.
Note
❒ Default: On
❖ ❖ ❖ ❖ Screen Colour Setting
You can select the screen color among from four types: Blue & Green Type,
Blue & Purple Type, Green Type, or Gray Type.
Note
❒ Default: Blue & Green Type
Settings You Can Change with User Tools
5
65