Ricoh Aficio2090 General Settings Manual page 112

Paper Tray Settings
Note
❒ The number of tab stock shifts can be set to millimeters, when [Tab Stock]
has been selected.
❒ "Thick Paper Setting" and "Tab Stock" can be set simultaneously. Thick
Paper Setting and Color Sheet can be set simultaneously.
❖ ❖ ❖ ❖ Paper Size
Reference
You can select the size of the copy paper loaded in Tray 2, 3, 7, and the in-
terposer. For the paper sizes you can load for each tray, see p.172 "Copy
Paper".
6
Important
❒ If the specified paper size differs from the size of paper actually set in the
paper tray, a misfeed might occur because the paper size is not detected
correctly.
Note
❒ For Tray 2 and Tray 3, setting of the selector knob takes priority. When set-
ting paper of a size not indicated on the selector knob, set the knob to the
p mark.
❖ ❖ ❖ ❖ Thick Paper Setting
You can set the thick paper setting to [On] or [Off].
❖ ❖ ❖ ❖ Copy Method in Duplex
You can select the copying method in duplex mode; 2 Sided Copy or 1 Sided
Copy.
❖ ❖ ❖ ❖ Apply Auto Paper Select
You can set the Auto Select mode to [On] or [Off].
98