Yamaha QL5 Reference Manual page 38

INPUT DELAY window (8ch)
You can set the on/off status and the value of the input channel delay.
2
3
4
5
1
DELAY SCALE button
Press the button to display the DELAY SCALE window, in which you can select the unit
for the delay time.
There are four delay scales: meter (meter/sec), feet (feet/sec), sample (number of
samples), and ms (millisecond).
2
Channel select button
The currently-selected input channel is indicated in blue. Press the button to select the
channel.
3
Delay setting knob (input channels only)
Use the [TOUCH AND TURN] knob to set the delay value. You can view the current value
immediately above the knob (always shown in unit of ms) and below the knob (shown
using the currently-selected scale). If ms (millisecond) has been selected for the DELAY
SCALE, nothing will appear above the knob.
4
DELAY ON button
Switches the delay on or off.
5
Tabs
Enable you to switch between windows.
1 6
6
Close button
Closes the window.
INPUT DELAY (CH1–32, CH33–64/ST IN (QL5), ST IN (QL1))
2
3
1
DELAY SCALE button
Press the button to display the DELAY SCALE window, in which you can select the unit
for the delay time.
2
Channel select button
Lights to indicate the currently-selected input channel. Press the button to select the
channel.
3
Delay setting knob (input channels only)
Use the [TOUCH AND TURN] knob to set the value. You can view the current value
immediately beside the knob (always shown in unit of ms) and below the knob (shown
using the currently-selected scale).
NOTE
If ms (millisecond) has been selected for the DELAY SCALE, nothing will appear to the right of
the knob.
38
Input channels
1
Reference Manual