Edge Cleaning Bristles: Removal & Replacement; Lightbulb: Removal & Replacement - Royal Vacuum Cleaner Owner's Manual

EDGE CLEANING BRISTLES: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
For bristle replacements, please call 1-800-321-1134 or visit our website at www.royalvacuums.com
to locate a dealer nearest you.
TO REPLACE EDGE CLEANING BRISTLES
2.
1.
Remove two (2) screws from Remove and dispose of old bristles
each edge cleaning bristle. and replace with new bristles on
each side.
LIGHTBULB: REMOVAL & REPLACEMENT
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING OR REPLACING
LIGHTBULB.
This cleaner uses a common automotive lamp #906, 13.0 volts. For bulb replacement call 1-800-321-1134
or your local auto parts store.
2.
1.
Lean cleaner handle Lift lens cover to remove.
back. Remove the two
(2) screws located
on either side of the
headlight lens.
3.
Replace all four (4) screws
to secure.
3. 4.
Pull bulb out of socket. Secure the headlight
Do NOT twist. Gently lens by replacing the
push bulb into socket two (2) screws.
to replace.
9