The Recorder Tray Will Not Open; The Recorder Does Not Recognize The Media - Rimage 2000i Knowledge Base

Rimage 2000i™ Knowledge Base
•
Your Rimage 2000i requires the attention of an authorized Rimage Repair Technician.
Contact your Rimage reseller for repair and service options.
There is no power to the
Important! Try these solutions in t
•
Reseat the power cables.
1. Power off the Rimage 2000i.
2. Unplug the power cables.
3. Connect the cables, ensuring that they are all secure.
4. Power on the Rimage 2000i.
•
Your Rimage 2000i requires the attention of an authorized Rimage Repair Technician.
Contact your Rimage reseller for repa
The recorder tray will not
Important! Try these solutions in the o
•
Reseat the power cables.
1. Power off the Rimage 2000i.
2. Unplug the power cables.
3. Connect the cables, ensuring that they are all secure.
4. Power on the Rimage 2000i.
•
Your recorder may need to be replaced. Contact your
options.
Th recorder does not recognize the media. e
Important! Try these solutions in the order they are presented.
•
Check th e media type. Refer to the Change the Media Type Service Bulletin
•
Be sure you are using Rimage media. For more information, see Rimage Media Kits
•
Your recorder may need to be replaced. Contact your Rimage reseller for repair and service
options.
August 3, 2007
recorder.
he order they are presented.
ir and service options.
open.
rder they are presented.
©Rimage 2007
Rimage reseller for repair and service
.
.
27