Can I Place Files On My Cache Hard Drive; Recorders Are Not Recognized By Production Server After The System Initializes; How Can I Operate My Rimage Autoloader System To Run From Remote Workstations Through The Network - Rimage 2000i Knowledge Base

Rimage 2000i™ Knowledge Base

Can I place files on my cache hard drive?

Cache drives should be reserved for recording purposes only. Placing files on the cache drive
adversely affects performance. Rimage recommends that you use your cache hard drive only for
recording purposes.
Recorders are not recognized by Production Server after the system
initializes.
Important! Try these solutions in the order they are presented.
The driver for the FireWire® controller may be unstable. Run one of the patch fixes from the
FireWire Fix document.
•
Reinstall the recorder driver.
1. Navigate: Start Menu -> All Programs -> Rimage -> Utilities.
2. Select Update Recorder Driver.
Note: This uses preinstalled drivers and does not require access to the internet or the original
software disc
• Ensure recorders are detected by Windows
1. Right-click on My Computer.
2. Select Manage.
3. Select Device Manager.
4. Select + next to DVD/CD-ROM drives.
5. Verify there are two DVD/CD-ROM drives showing, in addition to the number of DVD/CD-
ROM drives in the computer.
How can I operate my Rimage autoloader system to run from remote
workstations through the network?
Important: You must have OfficeNet Software to run your Rimage 2000i from remote
workstatio ns through the network. To purchase OfficeNet Software, contact your Rimage
reseller.
Use the OfficeNet Software Suite disc to install Qu
S cenarios section of the Advanced Setup Guide
August 3, 2007
ick Disc as a client. Refer to the Setup
.
©Rimage 2007
9