Connections To The Motherboard - SOYO SY-P4VGM V1.0 Quick Start Manual

SY-P4VGM V1.0 Quick Start Guide

Connections to the Motherboard

Step 4.
Refer to the following for information on connecting the SY-P4VGM V1.0 mainboard's devices:
Connectors and Plug-ins
Pin1 Pin2 Pin3
MIC IN GND VCC MIC
Pin1 Pin2
VERG_FP_ VERG_FP_ USB_FP_
USBPWR0 USBPWR0
JUSBC (These pins shared with one of the USB port of the I/O back panel)
Pin1
VCC
Pin1 Pin2
NC KEY
CD1 (Internal Sound Connections)
Connect the CD Line-in cord from the CD-ROM/
DVD device to the matching connector CD1
Power LED
Reset
PWRBT
HDD LED
Pin1 Pin2
LED Anode LED Cathode
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power
supply, an AT or ATX power supply can NOT be used.)
When using the Power-On by Keyboard function, please make sure the ATX power supply is able to
provide at least 720mA on the 5V Standby lead (5VSB).
AUDIO01 (Front Panel Audio Header)
Pin4 Pin5 Pin6
+5V LINE LINE
AUDIO OUT(R) OUT (R)
USB2 (Front panel USB Connector)
Pin3 Pin4 Pin5
USB_FP_ USB_FP_
P0- P1- P0+
Pin2 Pin3
USB- USB+
SIR1 (Infrared Port)
Pin3
+5V
Speaker
Pin1
VCC
Pin1
HDD LED
VCC
PWRBT
Pin1
Power On/Off
Power On/Off: PWRBT
ATX 12V Power Supply: ATX PW
10
Pin7 Pin8 Pin9
LINE
NC EMPTY
OUT (L)
Pin6 Pin7 Pin8
USB_FP_
GND GND
P1+
Pin4
GND
Pin4 Pin5
GND IRTX
Pin1 Pin2
CD IN L GND
Power LED
Pin2
NC
Speaker
Pin2 Pin3
NC NC
RESET
Pin2 Pin1
GND Control PIN
Pin10
LINE OUT (L)
Pin9 Pin10
USB_FP_
KEY
OC0
Pin5
KEY
Pin6
IRRX
Pin3 Pin4
GND CD IN R
Pin3
GND
Pin4
Speaker out
Pin2
GND