Connections To The Motherboard - SOYO SY-K7VME Quick Start Manual

SY-K7VME/K7VM333 Quick Start Guide

Connections to the Motherboard

Step 4.
This section tells how to connect internal peripherals and the power supply to the motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan,
Front Panel Devices (Internal Speaker, Reset Button, IDE LED and power switch), Wake-On-LAN
card and other devices.
For more details on connecting internal and external peripherals to your new SY-K7VME/K7VM333
motherboard, please refer to SY-K7VME/K7VM333 motherboard User's Manual and Technical
Reference online manual on the CD-ROM.
Connectors and Plug-ins
Pin1 Pin2 Pin3
AUD_ AUD_
AUD_MIC
GND MIC_BIAS
Pin1 Pin2
VERG_FP_ VERG_FP_
USBPWR0 USBPWR0
Pin1
VCC
Pin1 Pin2
NC KEY
CD1 (Internal Sound Connections)
Connect the CD Line-in cord from the CD-ROM device to
the matching connector CD1
Power LED
Reset
PWRBT
HDD LED
Pin1 Pin2
LED Anode LED Cathode
AUDIO1 (Front Panel Audio Header)
Pin4 Pin5
AUD_
AUD_VCC
FPOUT_R
USB2 (Front panel USB Connector)
Pin3 Pin4 Pin5
USB_FP_ USB_FP_ USB_FP_
P0- P1- P0+
J6:USB Card Reader Connector (Optional)
Pin2 Pin3
USB- USB+
SIR1 (Infrared Port)
Pin3
+5V
Speaker
Pin1
HDD LED
VCC
PWRBT
Pin1
Power On/Off
14
Pin6 Pin7 Pin8
AUD_
HP_ON KEY
RET_R
Pin6 Pin7 Pin8
USB_FP_
GND GND
P1+
Pin4
GND
Pin4 Pin5
GND IRTX
Pin1 Pin2
CD1 CD IN L GND
Power LED
Pin1 Pin2
VCC NC
Speaker
Pin2 Pin3
NC NC
Pin2 Pin1
GND Control PIN
Pin9 Pin10
AUD_ AUD_
FPOUT_L RET_L
Pin9 Pin10
USB_
KEY
FP_OC0
Pin5
KEY
Pin6
IRRX
Pin3 Pin4
GND CD IN R
Pin3
GND
Pin4
Speaker out
RESET
Pin2
GND