Connections To The Motherboard - SOYO SY-K7ADA Quick Start Manual

SY-K7ADA Quick Start Guide

Connections to the Motherboard

Step 2.
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (Suspend LED Internal Speaker, Reset Button and IDE LED
Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-K7ADA
Motherboard, please refer to SY-K7ADA Motherboard User's Guide and Technical
Reference online manual on the CD-ROM.
Connectors and Plug-ins
Standard IrDA (Infrared Device Header): SIRCON Wake-On-LAN Header: JP10
Pin1 Pin2 Pin3
+5V FIR IRRX
USB3_4: USB3
Pin1 Pin2
+5V Data(-)
USB5_6: USB5
Pin1 Pin2
+5V Data(-)
CPU Cooling Fan:
CPUFAN
Pin1 Pin2 Pin3
GND +12V SENSOR
Connect the CD Line-in cord from the CD-ROM device to
the matching header CDIN1
11 12 13 14 15 16 17 18 19 20
1 2 3 4 5
HDD LED
Pin9 Pin10
Power HDD LED
Connect your power switch to this header (momentary switch type).
To turn off the system, please press this switch and hold down for longer than 4
seconds.
Pin4 Pin5
GND IRTX
OVCROFF
Pin3 Pin4
Data(+) GND
Pin3 Pin4
Data(+) GND
Chassis Fan: CHAFAN
Pin1 Pin2
PWM2 +12V
CD Line-in: CDIN1
Pin11
LED
9 10
Pin17
Power
PWRBT
Pin4 Pin5
PWRBTN GND Power RST
ATX POWER On/Off : PWRBT
8
Pin1 Pin2
Pin6
5VSB GND
USB3_4: USB4
Pin6 Pin7 Pin8
+5V Data(-) Data(+)
USB5_6: USB6
Pin6 Pin7 Pin8
+5V Data(-) Data(+)
SYS Cooling Fan:
SYSFAN
Pin3 Pin1
SENSOR GND
Pin 1 Pin 2
CD_L GND
Power LED
Pin12
NC
Speaker
Pin18 Pin19
NC NC
RESET
Pin1 Pin2
GND Power
Pin3
PME #
Pin9 Pin10
GND GND
Pin9 Pin10
GND GND
Pin2 Pin3
+12V NC
Pin 3 Pin 4
GND CD_R
Pin13
GND
Pin20
Speaker out
Suspend LED
Pin7 Pin8
SP_LED