Connections To The Motherboard - SOYO SY-7VCA-E Quick Start Manual

SY-7VCA-E Quick Start Guide

Connections to the Motherboard

Step 2.
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (STR LED, Internal Speaker, Reset Button and IDE LED Switch.),
Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-7VCA-E
Motherboard, please refer to SY-7VCA-E Motherboard User's Guide and Technical
Reference online manual on the CD-ROM.
Connectors and Plug-ins
Wake-On-LAN Header: JP10
Pin1 Pin2
5V-SB GND
USB2 : ( PORT1 )
Pin1 Pin2 Pin3
VCC Data- Data+
CPU Cooling Fan: CPUFAN
Pin1 Pin2
GND 12V
Power LED
_
+ +
+
1 1
STR LED HDD LED
Reset PWRBT
HDD LED
Pin1 Pin2
LED Anode LED Cathode LED Anode LED Cathode Power On/Off
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Attach the ATX Power cable to this connector. (This motherboard requires an ATX power supply, an AT
power supply can NOT be used.)
When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to
provide at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.
Standard IrDA (Infrared Device Header): SIRCON
Pin3
MP_Wakeup VCC
Pin4 Pin5
GND NC VCC
Pin3
SENSOR
Speaker
_
Pin1
5V
_ _
+
Pin1
5V
STR LED ¡ °
Pin1 Pin2
ATX Power On/Off: PWRBT
ATX Power Supply: ATX PW
8
Pin1 Pin2 Pin3
NC IRRX
USB2 : ( PORT2 )
Pin6 Pin7 Pin8
Data- Data+
Chassis Fan: CHAFAN
Pin1 Pin2
GND 12V
Power LED
Pin2
NC
Speaker
Pin2 Pin3
NC NC
PWRBT
Pin1 Pin2
GND
Pin4 Pin5
GND IRTX
Pin9 Pin10
GND GND
Pin3
SENSOR
Pin3
GND
Pin4
Speaker out
RESET
Pin1 Pin2
Power Good GND