Connections To The Motherboard - SOYO SY-7VCM Quick Start Manual

SY-7VCM Quick Start Guide

Connections to the Motherboard

Step 2.
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (Internal Speaker, Reset Button and IDE LED Switch.), Wake-On-
LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-7VCM
Motherboard, please refer to SY-7VCM Motherboard User's Guide and Technical Reference
online manual on the CD-ROM.
Connectors and Plug-ins
Wake-On-LAN Header: JP10
Pin1 Pin2
5VSB GND
CPU Cooling Fan: CPUFAN
Pin1 Pin2
GND 12V
USB3
Pin1 Pin2
Power Data(-)
CD -IN: CDIN1 Connect to your CD-ROM audio output.
AUX-IN: AUXIN For Auxiliary Audio devices (1.0Vrms typ.)
PHON IN:
Connect to phone connector
PHON
PWRBT
HDD LED
Speaker
HDD LED
Pin1 Pin2
LED Anode LED Cathode
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Standard IrDA (Infrared Device Header): SIRCON
Pin3 Pin1
MP-Wakeup VCC
Pin3
SENSOR
Pin3 Pin4 Pin1
Data(+) GND Power
Reset
Pin1
1 1
5V
Pin1
5V
Power LED
PWRBT
Pin1
Power On/Off
ATX Power On/Off: PWRBT
8
Pin2 Pin3
None IRRX
Chassis Fan: CHAFAN
Pin1 Pin2
GND 12V
USB4
Pin2 Pin3
Data(-) Data(+)
Pin1 Pin2
L G
Pin1 Pin2
L G
Pin1 Pin2
IN G
Power LED
Pin2
NC
Speaker
Pin2 Pin3
NC NC
RESET
Pin2 Pin1
GND Power Good
Pin4 Pin5
GND IRTX
Pin3
SENSOR
Pin4 Pin5
GND GND
Pin3 Pin4
G R
Pin3 Pin4
G R
Pin3 Pin4
G Mono
Pin3
GND
Pin4
Speaker out
Pin2
GND