Ci300X Analogue Interface Unit; Figure 4-30 Ni300X Connection - Simrad AP35 Instruction Manual

Simrad AP35 Autopilot

4.29 CI300X Analogue Interface Unit

The NMEA 1-4 ports are identical in HW and SW and can be connected as
desired.
The CI300X analogue interface unit is an optional module, designed to
enable a variety of different equipment to connect into AP35 systems. The
CI300X converts the analogue inputs into Robnet compatible signals for use
by AP35 system components. The CI300X adds the following capabilities to
the AP35 system, and allows connection of each of the following
simultaneously:
• Magnetic compass connection with CD100/CD100A course detector.
• Gyrocompass connection for Simrad RGC50, RGC10
• Analogue input of SIN/COS for either one of the following:
68
TB6
ALARM
OUTPUT
(Normally open)
TB5
Clk C
Clk H
N.C.
DataC
DataH
TB4
TB11
TX-
TB11
TX+
TB7-B
RX-
TB7-A
RX+
TB3
TX-
TX+
RX-
RX+
TB2
TX-
TX+
RX-
RX+
TB1
BLACK
TX-
RED
TX+
RX-
RX+
TB8
_
12V DC
BLACK
OUT
RED
+
MAX 250 mA

Figure 4-30 NI300X connection

– Fluxgate compass connection (for other manufacturers SIN/COS
fluxgate compasses)
– Analogue windvane (SIN/COS)
SIMRAD
FURUNO
RADAR
DISPLAY
SIMRAD
IS15 EXPANDER
+12V
EXTERNAL
OUTPUT FOR RADAR,
INSTRUMENTS ETC.
STAND ALONE
SIMRAD
IS15 INSTRUMENT
GPS
IS15 INSTRUMENTS
SIMRAD SIMRAD
LORAN C
GPS OR
PLOTTER
22083083H