Installation Into A Factory Built (Metal) Fireplace - Lopi Pioneer Bay Installation And Use Manual

Installation into a Factory Built (Metal) Fireplace

"L" Vent Flex Section
The smoke shelf
may be removed.
The damper may
be removed.
Internal baffles
may be removed.
HINT:
Paint the interior of the
fireplace with latex paint to
prevent fireplace odors from
entering the home.
The metal sides, frame members, or other
structural components of the factory built
fireplace may not be removed or altered.
Travis Industries
Installation
Vertical Cap
Storm Collar
4 0 2 0 2 0 4
"L" Vent
Cover Plate (non-combustible)
Seal the cover
plate with silicone.
3/8" Gap is required between
the surround panels and the
front of the fireplace.
13" Min.
The masonry lining
may not be removed.
The log shelf,
screen, and doors
(if present) must
be removed.
6" Min.
Use the telescoping legs to
support the insert on raised
fireplaces.
9 3 5 0 8 0 5 1
1 3