Connecting With An Hdmi Compatible Television And Receiver - Panasonic Diga DMR-BW850 Operating Instructions Manual

Connecting with an HDMI compatible television and receiver

When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted. You can enjoy high quality, digital
video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High Defi nition Television), the output can be switched to
1080p, 1080i or 720p HD video.
This unit incorporates HDMI
TM
Video sources converted to 1920x1080 resolution, while of high quality, will exhibit somewhat lower subjective image resolution than true,
native 1080p full-HD sources. See dealer for details.
Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover).
When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
Regarding VIERA Link "HDAVI Control
When connecting with a Panasonic TV (VIERA) or a receiver equipped with the "HDAVI Control" function, linked operations would be possible.
[➡ 76, Linked operations with the TV (VIERA Link "HDAVI Control™")]
Non-HDMI-compliant cables cannot be utilised.
It is recommended that you use Panasonic's HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m), RP-CDHG15 (1.5 m), RP-CDHG20 (2.0 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m), etc.
Note
If you are connecting to a TV that is only compatible with 2 channel audio output, audio with 3 channels or more will be down mixed (➡ 118)
and output as 2 channels, even if connecting with an HDMI cable. (Some discs cannot be down mixed.)
You cannot connect this unit to DVI devices that are incompatible with HDCP.
For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input
terminal (PC monitors, etc.):
Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
(V.1.3a with Deep Colour, x.v.Colour
" function
TM
HDMI IN
HDMI cable
HDMI IN
HDMI OUT
HDMI cable
RF OUT RF IN
HDMI AV OUT
10BASE-T/
100BASE-TX
, High Bit rate Audio) technology (➡ 118, 119).
TM
Television's rear panel
Receiver's rear
panel
Required setting
Set "HDMI Video Mode" and "HDMI Audio
Output" to "On" (➡ 91).
(The default setting is "On".)
P
R P B
COMPONENT
VIDEO OUT
R-AUDIO-L VIDEO
This unit's rear panel
DIGITAL
Y
AUDIO OUT
COAXIAL
(PCM/
BITSTREAM)
S VIDEO OPTICAL
RQT9433
99