Check, Change Or Delete A Programme; Notes On Timer Recording - Panasonic Diga DMR-BW850 Operating Instructions Manual

Advanced timer recording

Check, change or delete a programme

Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Timer Recording
Remain HDD 75:15 DR
Channel Name Schedule Drive/Mode
TVNZ 6 FRI 27.03
z
The sitting 22:20 - 22:30
TV ONE
FRI 27.03
z
ONE News Tonight
22:30 - 23:00
TV2 FRI
z
Supernatural 22:30 - 23:25
TV ONE FRI 27.03
How To Look Good Naked 21:30 - 23:30
New Timer Programme
OK Total 4/32 DEL Delete
Timer Off History List
RETURN
Icons
z
Red: Timer recording standby is activated.
Grey: Timer recording standby is not activated.
*
This programme is currently recording.
Part or all of the programme will not be recorded since
the programme is overlapping.
The HDD was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
The programme did not complete recording because of
some reason.
Timer programmes set to Auto Renewal Recording
(➡ 33).
OK: Displayed if the recording can fi t in the remaining
space.
(Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the HDD.
! :
It may not be possible to record because:
there is not enough space left.
the number of possible titles has reached its
maximum. (➡ 28)
■ To change a programme
Press [ e , r ] to select the programme and press [OK]. (➡ 23,
step 3)
■ To delete a programme
Press [ e , r ] to select the programme and press [DEL].
■ To confi rm the History List
1 Press the "Green" button.
2 Press [ e , r ] to select the programme and press [OK].
Reason why the timer recording failed or similar can be
confi rmed. Press [OK] again to exit.
Press the "Green" button to return to the previous screen.
■ To exit the timer recording list
Press [PROG/CHECK].
Note
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
RQT9433
34
HDD
FRI 27.03.2009 21:41
Space
HDD
OK
DR
HDD
!
DR
HDD -->
DR 24.04
HDD
DR
Page Up
CH
Page Down

Notes on timer recording

Timer recording will not be performed if the clock is not set.
If "TV System" (➡ 90) in the Setup menu was modifi ed to playback
a disc or a title while on timer recording standby, return the setting
to original before the recording is started.
Timer recordings are activated regardless of whether the unit is
turned on/off.
Timer recordings begin when the set time is reached even when
playing.
Timer recordings do not begin while copying in normal speed
mode.
The timer recording starts, whether the unit is turned on or off. If
the recording starts with the unit turned on, you can turn the unit
off without affecting the recording status. This unit's on/off status
during the timer recording will not change after the timer recording
fi nishes.
When you programme successive timer recordings to start
immediately one after the other, last 1 minute of earlier
programme will not be recorded unless it can perform 2
programmes simultaneous recording.
Programme Programme
Recorded
If timer recordings overlap around the same time, some
programmes will not be recorded depending on the set timer
recordings. As for programmes with "
recording list screen, some portion or all of the programmes
cannot be recorded. Press [PROG/CHECK] to confi rm. (➡ left)
Starting of the timer recording while executing other operation
(➡ 103)
Not recorded
Recorded
" displayed on the timer