4
HIGH BEAM AND LOW BEAM
BULBS
CAUTION
Do not pull on the wiring to disconnect
the bulb connector.
◆
Grasp the bulb electric connector (3) and
pull to detach it from the bulb.
◆
Rotate
the
bulb
counterclockwise and extract it from its
seat in the reflector.
◆
Remove the bulb.
To refit:
NOTE
Fit the bulb into the seat in the
reflector. Make sure the three bulb pegs
become seated in the guides in the
reflector seat.
◆
Place the bulb holder (4) into the
reflector seat and turn it clockwise.
◆
Connect the bulb connector (3).
3
REPLACING THE PARKING LIGHT
BULB
Read page 83 (BULBS) carefully.
NOTE
To replace the parking light bulb it
is not necessary to remove the lens.
To replace:
◆
Remove the front cover, page 74
(REMOVING THE FRONT COVER).
holder
(4)
5
6
CAUTION
Proceed with care.
Do not damage the tabs and/or their
seats.
◆
From behind the bulb holder (6) turn and
extract the entire bulb holder.
◆
Remove the bulb (5) from its housing.
NOTE
Insert the bulb (5) into the bulb
holder (6) matching the two locating pegs
with their guides in the bulb holder.
◆
Fit a new bulb of equal rating. Make sure
it is positioned correctly.
◆
Reverse removal procedure to install the
bulb.
use and maintenance Atlantic 200
85
USA