Replacing The Media Sensor - TEC B-450 SERIES Maintenance Manual

2. MAJOR UNIT REPLACEMENT

2.6 REPLACING THE MEDIA SENSOR

2.6.1 B-452-TS Model
Replacing the Sensor PCB (TR)
1) Push down the head release lever R to open the print head block. (Refer tp Sectopm 2.4.)
2) Remove the sensor holder from the sensor holder arm.
3) Remove the sensor cover sheet from the sensor holder.
Sensor Holder
Sonsor Holder Arm
Sensor Holder
2-12
EO18-33003A
2.6 REPLACING THE MEDIA SENSOR
Fig. 2-19
Sonsor Cover Sheet
Fig. 2-20