Permanent Display; Switching Adaptive Highbeam Assist On/Off; Selecting The Unit Of Measurement - Mercedes-Benz E-Class Coupe Operator's Manual

Menus and submenus
224
Instrument cluster
Selecting the unit of measurement for
distance
Display Unit Speed-/Odometer:
The
function allows you to choose whether
certain displays appear in kilometers or miles
in the multifunction display.
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Inst. Cluster
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting:
miles.
X
Press the a button to save the setting.
The selected unit of measurement for
distance applies to:
the digital speedometer in the
R
odometer and the trip odometer
R
trip computer
R
current consumption and the range
R
the navigation instructions in the
R
menu
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Inst. Cluster
X
Press a to confirm.
Sett.
menu.
submenu.
km
or
Trip
menu
Navi
Sett.
menu.
submenu.
X
Press the : or 9 button to select the

Permanent Display:

You will see the selected setting
Temperature Speedometer [km/h]
or
(USA)/Speedometer [mph]
X
Press the a button to save the setting.
i
The speed is shown in km/h (USA)/mph
(Canada).
Lights
Switching the daytime running lamps on/
off
i This function is not available in Canada.
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Lights:
function.
Day Lights:
If the
the cone of light and the W symbol in
the multifunction display are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps ( Y page 121).
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam
If the Adaptive Highbeam
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X
Press the a button to save the setting.
function.
Outside
(Canada).
Sett.
menu.
Day
have been switched on,
Sett.
menu.
function.
function has