Adjusting The Seats - Mercedes-Benz E-Class Coupe Operator's Manual

Seats
108
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see the "Interior care" section.
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! To avoid damage to the seats and the seat
heating, observe the following information:
keep liquids from spilling on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see "Interior care".
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
!
Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
i The head restraints in the front seats are
installed with the NECK-PRO system
( Y page 51). For this reason, it is not
possible to remove the head restraints
from the front seats.
For more information, contact a qualified
specialist workshop.
Further related subjects:
i
Through-loading feature in the rear
R
bench seat (Coupe) (folding the rear
bench seat forward) (

Adjusting the seats

Head restraint height
:
Seat cushion angle
;
Seat height
=
Seat fore-and-aft adjustment
?
Backrest angle
A
®
i If PRE-SAFE is triggered, the front-
passenger seat will be moved to a better
position if it was previously in an
unfavourable position.
i You can store the seat settings using the
memory function ( Y
i
Vehicles with the through-loading
feature: if you fold down a rear seat
backrest, the respective front seat is
moved forwards slightly in order to avoid
contact.
Y page 270)
page 117).