Start/Stop Button; Keyless-Go - Mercedes-Benz E-Class Coupe Operator's Manual

G
WARNING
If the parking brake has not been fully
released when driving, the parking brake can:
overheat and cause a fire
R
lose its hold function.
R
There is a risk of fire and an accident. Release
the parking brake fully before driving off.
! Warm up the engine quickly. Do not use
the engine's full performance until it has
reached operating temperature.
Only shift the automatic transmission to
the desired drive position when the vehicle
is stationary.
Where possible, avoid spinning the drive
wheels when pulling away on slippery
roads. You could otherwise damage the
drive train.
SmartKey positions
SmartKey
To remove the SmartKey
g
(shift the transmission to position P)
Power supply for some consumers, such
1
as the windshield wipers
Ignition (power supply for all consumers)
2
and drive position
To start the engine
3
i The SmartKey can be turned in the
ignition lock even if it is not the correct
SmartKey for the vehicle. The ignition is not
switched on. The engine cannot be started.

KEYLESS-GO

General notes
Do not keep the KEYLESS-GO key together
R
with:
electronic devices, e.g. a mobile phone
-
or another key
metallic objects, e.g. coins or metal film
-
Do not keep the KEYLESS-GO key in metal
R
objects, e.g. metal cases.
This can affect the functionality of
KEYLESS-GO.
Vehicles with KEYLESS-GO are equipped with
a SmartKey featuring an integrated KEYLESS-
GO start function and a detachable Start/
Stop button.
The Start/Stop button must be inserted into
the ignition lock and the SmartKey must be in
the vehicle.
Pressing the Start/Stop button several times
in succession corresponds to the different
SmartKey positions in the ignition lock. This
is only the case if you are not depressing the
brake pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts
immediately.
The Start/Stop button can be removed from
the ignition lock. Then, you can insert the
SmartKey into the ignition lock.
i
You do not have to remove the Start/Stop
button from the ignition lock when you
leave the vehicle. You should, however,
always take the SmartKey with you when
leaving the vehicle. As long as the
SmartKey is in the vehicle:
the vehicle can be started using the
R
Start/Stop button and
electrically powered equipment can be
R
operated.
Driving
151
Z