Removing A Wheel - Mercedes-Benz E-Class Coupe Operator's Manual

Jacking points for the jack (example: Coupe)
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
Vehicles with AMG equipment: to protect
the vehicle body, the vehicle has covers next
to the jacking points on the outer sills.
X
Vehicles with AMG equipment: fold
cover ; upwards.
X
Position jack ? at jacking point =.
Changing a wheel
Example
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn crank A clockwise until jack ? sits
completely on jacking point = and the
base of the jack lies evenly on the ground.
X
Turn crank A until the tire is raised a
maximum of 1.2 in (3 cm) off the ground.

Removing a wheel

! Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
X
Unscrew the uppermost wheel bolt
completely.
X
Screw alignment bolt : into the thread
instead of the wheel bolt.
X
Unscrew the remaining wheel bolts fully.
X
Remove the wheel.
347
Z