Permanent Display - Mercedes-Benz 2016 SLK Operator's Manual

the trip computer
R
the current consumption and the range
R
the navigation instructions in the
R
menu
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
R
Selecting permanent display
The

Permanent Display:

you to choose whether the multifunction dis-
play always shows the outside temperature or
the speed in km/h. Canada only: the speed is
shown in mph. The speed display is inverse to
the speedometer.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent Display:
The current setting Outside Temperature
or Speedometer [km/h]/Speedometer
[mph] appears.
Press the a button to save the setting.
X
Lights
Setting the daytime running lamps
This function is not available in Canada.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the : or 9 button to select the
X
Light submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Running Lights function.
If the Daytime Running Lights
has been switched on, the multifunction
display shows the cone of light and the
W symbol in orange.
Press the a button to save the setting.
X
Further information on daytime running
lamps (
Navi
Setting the brightness of the ambient
lighting
X
X
X
function allows
X
X
X
Sett. menu.
X
submenu.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
function.
off
X
X
X
X
Sett. menu.
X
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
Daytime
X
function
X
Menus and submenus
page 108).
Y
Press the = or ; button on the steer-
ing wheel to select the Sett.
Press the : or 9 button to select the
Light submenu.
Press a to confirm.
Press the : or 9 button to select the
Amb. Light +/- function.
The current setting appears.
Press a to confirm.
Press the : or 9 button to adjust the
brightness to a level from
Level 5 (bright).
Press the a or % button to save the
setting.
Press the = or ; button on the steer-
ing wheel to select the Sett.
Press the : or 9 button to select the
Light submenu.
Press a to confirm.
Press : or 9 to select the
round Lighting function.
If the Surround Lighting
vated, the multifunction display shows the
light cone and the area around the vehicle
in orange.
Press the a button to save the setting.
Before leaving the vehicle, turn the Smart-
Key to position 0 in the ignition lock.
Turn the SmartKey to position 2 in the igni-
tion lock.
The exterior lighting delayed switch-off is
deactivated.
205
menu.
Disabled to
menu.
Sur‐
function is acti-
Z