Table of Contents
Advertisement
There are two levels of access rights/privileges for the Router:
l
Administrator: User name admin, the administrator account has complete read/write access on all
pages (Status, Configuration and Admin Privilege). Admin account also has FTP server access.
l
User: User name user, the User account has read/write access to pages under the Status and
Configuration sections.
The following steps will enable you to log into the Router:
1. Launch the Web browser (Internet Explorer, Netscape, etc.).
2. Enter the LAN port default IP address (default gateway) http://10.0.0.2 in the address bar.
3. Entry of the username and password will be prompted. Enter the default login User Name and Password:
The default login User Name of the administrator is admin, and the default login Password is epicrouter. The
default login User Name for the non-administrator is user, and the default login Password is password.
4. Remember my password checkbox: By default, this box is not checked. Users can check this box so
that Internet Explorer will remember the User name and Password for future logins. It is recommended
to leave this box unchecked for security purposes.
Admin and User passwords can be changed after login. Refer to Section 5.10 for User Password
configuration and Section 6.9 for Admin Password configuration for further instruction.
3. Login
4
Advertisement
Table of Contents
