Table of Contents
Advertisement
Supplier Interval: It allows you to enter the Supplier Interval timer in seconds.
This timer specifies how often the RIP sends announcements as a RIP Supplier.
Range: 0 - 2147483647
Expire Timeout:It allows you to enter the Expire Timeout in seconds. This timer specifies the expiration
time of a route. When a route has not been updated for more than the "expire" period of time, it is removed
from the Route Table. This route is then invalidated and remains in the internal RIP Route Table. It will be
included in the RIP announcements to let other routers know the changes.
Range: 0 - 2147483647
Garbage Timeout: It allows you to enter the Garbage timer in seconds. This timer specifies how long the
expired and invalidated routes are kept in the Internal RIP Route Table before they are removed from it.
Range: 0 - 2147483647
6.6.1 RIP Per Interface Configuration
The RIP Per Interface Configuration page allows you to set the configuration for each Interface (PVCs,
PPP Sessions and LAN).
Interface: It allows you to choose the Interface (PVCs, PPP Sessions and LAN), for the RIP to be
configured. The available selections are: IP Ethernet 0, IP USB 0, IP PVC0...IP PVC7, IP BridgeMux 0, and
any PPP user defined sessions (maximum of 16):
Enable: It allows you to Enable (Yes) or Disable (No) the specified interface for RIP.
Supplier: It allows you to select the Supplier Mode (RIP Transmit).
l
Disabled: The supplier transmit is disabled.
l
V1 BC: The supplier transmits in RIPv1 Broadcast.
l
V2 BC: The supplier transmits in RIPv2 Broadcast.
l
V2 MC: The supplier transmits in RIPv2 Multicast.
Listener: It allows you to select the Listener Mode (RIP Receive).
l
V1: The listener receives the RIPv1 only.
l
V2: The listener receives the RIPv2 only.
l
V1+V2: This listener receives the both RIPv1 and RIPv2.
Current RIP Settings: It displays the each interface's RIP status.
Default: 30
Default: 180
Default: 120
32
Advertisement
Table of Contents
