Table of Contents
Advertisement
Source MAC: This is the Source MAC to block or from which to forward. See the next page for instructions
on how to configure this. The Source MAC must consist of 12 hexadecimal characters.
Destination MAC: This is the Destination MAC to block or to forward to. See the next page for instructions
on how to configure this. The Destination MAC must consist of 12 hexadecimal characters.
Type: Enter the hexadecimal number for the Ethernet type field in Ethernet_II packets. For example, 0800
is for IP protocol. The Type must consist of 4 hexadecimal characters.
Block: When block is selected, everything from the Source MAC with destination Destination MAC will be
blocked.
Forward: When forward is selected, everything from the Source MAC will be forwarded to the Destination
MAC.
Q. How do I block packets from MAC address 000002fa6fab through IP protocol?
Answer: First go to the Bridge Filtering page under Configuration. Then type 000002fa6fab in the ID
Source MAC field and 0800 in the Type field. If bridge filtering is not already enabled, select Yes under the
Enable Bridge Filtering field. Then select Block and click Submit.
Q. How do I block incoming packets with destination MAC address 000003dc8faa through IP protocol?
Answer: First go to the Bridge Filtering page under Configuration. Then type 000003dc8faa in the
Destination MAC field, and 0800 in the Type field. If bridge filtering is not already enabled, select Yes
under the Enable Bridge Filtering field. Then select Block and click Submit.
Q. How do I forward packets with MAC address 000002fa6fab to destination MAC 000003dc8faa through
IP protocol?
Answer: First go to the Bridge Filtering page under Configuration. Then type 000002fa6fab in the ID
Source MAC field, 000003dc8faa in the Destination MAC field, and 0800 in the Type field. If bridge
filtering is not already enabled, select Yes under the Enable Bridge Filtering field. Then select Forward
and click Submit.
5.8 DNS Configuration
The DNS Configuration page allows you to set the configuration of the DNS proxy.
For the DHCP requests from local PCs, the DHCP server will set the LAN port IP as the default DNS server.
23
Advertisement
Table of Contents
