Table of Contents
Advertisement
FTP server: It allows you to enable or disable the FTP server connection.
System default is Enabled.
l
Disable WAN side FTP access: This will disable WAN side access to the FTP server, default is
Disabled.
TFTP server: It allows you to enable or disable the TFTP connection. System default is Disabled.
DMZ: A DMZ (De-Militarized Zone) is added between a protected network and an external network, in
order to provide an additional layer of security. When there is a suspected packet coming from WAN, the
system will forward this packet to the DMZ host.
DMZ Host IP: The IP address of the DMZ host viewable at the WAN (external) side.
DHCP Dynamic Host Configuration Protocol is a communications protocol that allows network
administrators to manage and assign IP addresses to computers within the network. DHCP provides a
unique address to a computer in the network which enables it to connect to the Internet through Internet
Protocol (IP).
l
NONE: It will disable the DHCP server. Note that this setting will override the DHCP Server
Enable/Disable on the LAN configuration page.
l
DHCP Server (default): Select this to activate the DHCP server.
l
DHCP Relay: If it is enabled, the DHCP requests from local PCs will forward to the DHCP server runs
on WAN side. To have this function working properly, please disable the NAT to run on router mode
only, disable the DHCP server on the LAN port, and make sure the routing table has the correct
routing entry.
DHCP Relay Target IP: If DHCP Relay is enabled, DHCP requests are relayed to DHCP Target IP on the
WAN side.
IGMP Proxy: It is the global setting for IGMP Proxy. If it is enabled, then the enabled IGMP Proxy on WAN
PVCs will be working. Otherwise, no WAN PVC can have IGMP Proxy working on it. System default is
Disabled.
PPP Half Bridge: When PPP Half Bridge is enabled, only one PC is able to access the Internet, and the
DHCP server will duplicate the WAN IP address from the ISP to the local client PC. Only the PC with the
WAN IP address can access the Internet. System default is Disabled.
PPP reconnect on WAN access: If enabled, the PPP session will automatically establish a connection
when a packet tries to access the WAN. System default is Disabled.
Connect PPP when ADSL link is up: If this option is enabled, the Router will connect the PPP session
whenever an ADSL connection is established. If this option is disabled, the PPP session will not connect
whenever the ADSL Showtime is reached.
System default is Enabled.
?
Note For more information, please refer to Section 5.4: PPP Configuration.
SNTP: Simple Network Time Protocol is an efficient method of obtaining the time from a Time Server.
Time Zone: It specifies the time zone (geographical location).
Daylight Saving Time: You can select yes to activate Daylight Savings Time.
User defined Time server: This is the time server from which the Router retrieves the time.
34
Advertisement
Table of Contents
