Troubleshooting - Vision Fitness S7200HRT Owner's Manual

TROUBLESHOOTING

Our Suspension Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may reveal the cause.
PROBLEM:
SOLUTION:
console is turned on.
SOLUTION:
Elliptical Trainer, and the power switch located near the plug is on.
SOLUTION:
PROBLEM:
SOLUTION:
SOLUTION:
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn the
power off and contact your retailer.
30
The console does not light up.
Check to make sure the power switch located on the backside of the
Make sure the power cord is plugged into the base of the Suspension
Make sure the wire harness is plugged into the back of the console.
You feel a thump or hitch in the stride motion.
Check assembly and tightness of all hardware.
Check the bolts and the bracket under the footplate.